Blue Point by Snap on Continuous Battery Charger Instructions 6v 12v With Wheels
Description
WBC-200 6V/12V Wheel Automotive Battery Charger
The WBC-200 6V/12V Wheel Battery Charger is capable of testing, charging and maintaining all types of 6V and 12V lead-acid batteries, including WET (Flooded), GEL, MF (Maintenance-Free), EFB (Enhanced Flooded Battery), AGM (Absorbed Glass Mat), and 12V Lithium and AGM+ batteries. It has a built-in intelligent microprocessor which makes charging faster, easier, and safer to use. Safety features include spark proof, reverse polarity, short circuit, over current, overcharge and overheat protection. Keep it connected 24/7 without damaging the battery and keep your battery ready to use.
Our WBC series is equipped with a 200A engine start mode, which allows the user to jump-start automotive engine batteries, and can be left safely connected for maintenance using our 6A trickle charge feature.
Two unique but convenient features included on our WBC series are the 40A boost feature and the alternator check function. Our 40A boost will charge standard batteries more quickly if the user is in a hurry, and it is possible to check the status of your automotive alternator simply by hooking it up to your vehicle and following the instructions in the user manual.
To make this battery charger more convenient to use, we have equipped it with heavy duty wheels for easy mobility, as well as a collapsible handle for compact storage and transport.
Click and Drag to View in 3D
Advanced Safety Features
The WBC-200 has a variety of built-in safety features, such as spark proofing, protection for reverse polarity, short-circuiting, overheating, overcharging and overcurrent, the WBC-200 provides an efficient and easy to use a battery charger that will always have your batteries in top performance condition.
A unique feature included in our charger is an Alternator Check Function. Once your charger is hooked up to your vehicle battery, all you have to do is start your vehicle and turn on the headlights and the display will show the voltage, indicating the condition of the alternator!
The WBC-200 Smart Battery Charger comes standard with a 6ft power cord and 6ft cable set, allowing for 12 feet of mobility from an outlet to the battery.
Portable Jumpstarter
Not only does the WBC-200 Smart Battery Charger charge and maintain automotive batteries, it can double as a 12VDC 200A engine starter, meaning it can jump your vehicle the same way you would normally jump start a vehicle but without the hassle of pulling out a separate device. Not only that, but the WBC-200 is equipped with a boost function that supplies an extra 40A power burst to charge low batteries even faster.
Protect Your Batteries and Your Chargers
Our shelf chargers are built to ensure that even an accidental mis-connection won't cost you money or property.
Smart Protection to keep you safe.
Completely Spark Proof • Fault Protection • Reverse-Polarity Protection
Plus Protection from Short Circuits, Open Circuits,
Overheating, Over-Current, and Overcharge
Portable and Powerful
We outfitted the WBC-200 with several external features to ensure ease of use despite its awesome power output capabilities. A built-in retractable handle for mobility, as well as our simple yet durable easy-roll wheels and clamp mounts for hassle-free portability and storage.
Easy to use interface.
Control display for the WBC-200 is easy to understand and straightforward to use, with an LCD digital readout and clearly labeled mode selection buttons.
Technical Specifications
| What's Included | • WBC-200 battery charger • Set of battery clamps • User manual, registration card and, warranty information |
| AC Input | 120VAC, 60Hz, 11.5A Maximum continuous, 48A MAXIMUM INTERMITTENT. |
| DC Output | Charge: 6/12VDC, 2A-120 Seconds, 6A-60 Seconds Boost: 6/12VDC, 40A Continuous Engine Start: 12VDC, 200A Intermittent 5 Seconds On, 240 Seconds Off. Temperature Controlled |
| Charger Type | 4 step, Fully automatic charging cycle |
| Start Voltage | > 1V |
| Housing Protection | IP20 |
| Battery Type | All Types of 6V and 12V Lead-acid Batteries |
| Battery Capacity | 4-650Ah (6V/12V) Maintains all battery sizes |
| Ambient Temperature | 32˚F – 104˚F (0˚C – 40˚C) |
Source: https://smartechproduct.com/products/smartech-wbc-200-6v-12v-wheel-automotive-battery-charger/
0 Response to "Blue Point by Snap on Continuous Battery Charger Instructions 6v 12v With Wheels"
Post a Comment